Detailed Product Description
Specification
|
| TECHNICAL SPECIFICATIONS | MODEL UNIPAVE UWM-04 | MODEL UNIPAVE UWM-05 | | Transmission | Mechanical | Mechanical | | Front Wheel | Solid rubber tyre
2 Nos.600 Dia. x175 mm. | Solid rubber tyre
4 Nos.550 Dia. x175 mm. | | Rear Wheel | 2 Nos. Pneumatic tyre
Size : 12.00 x 20 | 4 Nos. Pneumatic tyre
Size : 9.00 x 20 | | Turning Radius | 7 Mts. outside | - | | Max. Opt. Wt. | 9000 Kgs. Approx. | 11000 Kgs. Approx. | | Hopper Capacity | 4.25 CM | 4.25 CM | | CAPACITY OF TANK | | | | Fuel | 120 L | 150 L | | Hydraulic | 45 L | 80 L | | STANDARD ACCESSORIES | Canvas Canopy, Working Lights, Traveling Lights, Tool Kit with Jack & Horn | | Prime Mover | Kirlosker make water-cooled electric start Diesel Engine Model 4R 1040 60
BHP at 2000 rpm or equivalent | | Transmission | Mechanical transmission, 8 speed reduction gearbox with differential lock
arrangement.
All the gears are of alloy steel & are hardened and ground and are working
in oil bath. | | Screed | The main screed is pivoted at the
center point of the machine to assure
a constant flatness of work on
uneven grounds. It consists of 2400
mm main screed with mechanical
extension of suitable size of work up
to 4600 mm. The screed plate is 600
mm wide, 16 mm thick and made of
carbon steel and hardened for long
service life. | The main screed is pivoted at the
center point of the machine to assure
a constant flatness of work on uneven
grounds. It consists of 2660 mm main
screed with mechanical extension of
suitable size of work up to 5000 mm.
The screed plate is 600 mm wide, 16
mm thick and made of carbon steel
and hardened for long service life. | | Brakes | The brakes consist of two hydraulic callpers and independent brake boosters,
which are controlled by pedal from the operator's seat. The safety brakes
are acting on the speed shaft, which are coupled to the drive wheels. | | Thrust roller | Two thrust rollers are fixed on front
beam fitted on front part of the
machine. | Two thrust rollers are fixed on heavy
oscillating beam provided on front part
of the machine. | | Operator's seat | Operator's seat is fitted on the left side of the machine. The seat is
adjustable. All panels and levers are within the easy reach of the operator. | | Hopper and feeding systems | The movement of the two hoppers is obtained by means of hydraulic
cylinder. Two conveyor chains one on each side is independently controlled
and made of Hardened Steel and covered with rubber belts. Material
conveyed on both side is sprayed by two auger, both independently
controlled by levers provided near the operator's seat. | | Electrical System | 12 V battery is provided for lighting system working and traveling of
machine. | | Optional attachment | The adjustable of Grade and Slope of laying mat can be controlled by
Electronic sensor so as to have accurate profile of mat as per job
requirement. |
|
SALIENT FEATURES
All operating levers including panel switchboard are handy and within easy reach of operator
All gears and shafts of gearbox are made from alloy steel and are hardened and ground for efficient working
All chain wheel are made of carbon alloy steel for efficient working
Screeds plates are of carbon steel material and are hardened & tempered for wear resistance
Single lever control for speed gearing is provided which prevent dual engagement and breaking of gears
Screed is vibrated with hydraulic motor for compacting the laid layer
Auger Screw plate is coated with Abrasion resistance welding rod and its edge is coated twice for wire resistance
All jacks are having one kind of seal kit. ( Piston seal and rod seal of P U material.)
EXTRA FEATURES OF UMW-05 Rear Wheel on equalizer Beam reduces undulations of the laid met and decreases wheel slipping.
Hydraulic steering for easy operation.
( NOTE : SPECIFICATION/DESCRIPTION ARE INDICATIVE AND SUBJECT TO CHANGE WITHOUT NOTICE DUE TO MODIFICATION ALTERATION OR CUSTOM ENGINEERING )
Asphalt Wetmix Paver
